This wireless microphone is a new listening device that contains a special receiver as well as a quart oscillator transmits.
This product is the latest research in science and technology in Taiwan. Back out with automatic voice-activated function, the volume of ultra-compact,ultra-clear sound quality, ultra-long standby, and simple operation, and stable performance, easy installation can be features such as external control, plus a flashlight function. It can be used for remote monitoring, location tracking of the base station, home monitoring and car anti-theft tracking.
Product structure
Operation guide:
1.Flashlight: press picture switch when you want turn on or turn off.
2.Turn on open the back cover; insert the SIM card holder automatically boot, boot-up indicator light means the rear cover can be stamped out after the dial-up use.
3.Install: please note that GSM network signal strength, not install in the absence of signal of weak signal areas so that affect the use effection or lead it not can be used.
4.Number setting: before writing code, please put the switch to manual place, then put the switch in wire phone number, dialing the machine, it will automatically hang up a few seconds later. No need answer at this time, put the switch in the normality location. At this time, the number has been written into the host. As long as the detected sound to the set will automatically dial-up phone.
5.Voice function: put switch in the sound control position, when you are not using voice-activated switch, please put the switch in the manual position. No matter if the outside sound with or without. This is couldnt automatically back out, just only answer a call.
6.External control: this machine may contact with an external control such as human infrared control, RF wireless control, magnetic, mobile, vibration control, plus a single-clip control, ect. Support the external battery.
Notice:
1. Please turn off the machine when charge, that will avoid damage the main machine.
2. Before use the machine, need to charge 6-8 hours charging in order to achieve better results, charge to use the local distribution charger, so that not to damage the host.
3. Standby time3-5 working days for voice control, 6-15 working days for no use voice control, 30-40 working days for the flashlight. The frequency is decided the standby time.
4. Light does not shine: please check whether the battery power.
5. Not get through phone: please check the SIM card is not plugged, restart SIM card.
6. Non-automatically response: restart SIM, then turn on.
Confirmed if it GSM or not, this machine is GSM network, make sure the signal is strong or not. The phone will check it, make sure if the switch in the normality place, please put the switch in place.
Check if save telephone number, restarts write code
